# Visual review
Profile read with view_image: two rounded pockets, one through hole, small crescent raised region crossing the step. d2 drawing read: hole enclosure compact, crescent localized, but long shallow lower background diagonals and tall pocket fans are poor. Revise to rectangular lower panels, bounded-height pocket panels and interior pocket rings. No human grades.

d5 read with view_image: both rounded pockets are isolated by four outer quads and four inner ring quads around rectangular cores. Hole box stays at hole scale and shares the step line; the seven crescent blocks are tiny but needed for the two 40-degree tips. Broad lower-left background now uses rectangles. The lower-right fan remains relatively shallow at its bottom/top corners (minimum sine .3608) but check passes; accept this tradeoff for the first realized diagnostic. Main pocket and local crescent symmetry retained. No features omitted. The x=.30 partition adds ordinary-width background panels rather than a thin strip. Submit as rev1.

rev1 drawing read with view_image. Overall layout remains as submitted; realized refusal is aspect ratio 54.0962 at crescent line-side block, edges .026667/.001429/.07728. Simplify crescent from seven to four quads and two internal valence-three nodes. This reduces unnecessary tiny subdivisions, preserves every boundary, and removes two associated background fan rays.

d7 drawing read with view_image: simplified four-block crescent has two symmetric inner corners. The through-hole ring and pocket enclosures are unchanged, no omissions. Right background has three broad blocks instead of five; bottom acute transition remains the minimum sine but passes. Submit as rev2 to measure the aspect improvement.

rev2 drawing read: four-block crescent and three-block background are simpler, but measured aspect30.8878 remains over20, despite SJ .36085. The long outer step side opposite the short crescent arc appears to propagate subdivisions through its width. Add local enclosure at x=1.23387325 and continue its line through the right pocket centre, preserving local pocket symmetry and removing broad lower-right fans.

d8 drawing read: the lower-right diagonals now approach 45 degrees and end at a local enclosure. The added full-height line is a broad partition through the right pocket centre, not a sliver; it adds symmetric ring splits inside that pocket. Hole and left pocket unchanged. This is a clear visual improvement in the crescent transition; submit rev3.

Final rev3 drawing read with view_image after full run: the displayed count is true and strict/stable are true. Layout structure matches d8; local crescent isolation solves the realized failure without removing geometry. Final through-hole enclosure remains compact, four-block crescent keeps symmetric acute tips, both pockets have conforming rings. Remaining tradeoffs are 57 total blocks and some background subdivisions carried through the plate to maintain conformity; these strips have ordinary widths, and the added right centre line improves local symmetry. Author review only; no human grade assigned.

Retrospective visual reads of all remaining named rejected-draft drawings: d1 shows a hanging B45 node and malformed lower-right fan; d3 shows duplicated names along y=.45 and long left-pocket diagonals; d4 resolves naming but retains shallow long diagonals at the left pocket; d6 shows the simpler crescent whose inner corners were too obtuse. These are rejected drafts, never full submissions. All eight draft drawings and three full-run drawings have now been read with view_image.